The Hialeah Bathroom Remodel Cost Guide

hialeah bathroom remodel costFor some reason, your bathroom starts to feel outdated, storage becomes an issue, leaks and other bathroom problems arise – when these happen, you tell yourself, it’s time for a bathroom makeover.

A bathroom remodel can breathe a new life to your old bathroom. More importantly, it can fix problems that are otherwise difficult to solve without doing a total bathroom remodel. A bathroom redo can also increase the value of your home and improve the efficiency of your bathroom, but it can be expensive if you don’t know how to budget.

How much does a bathroom remodeling cost in Hialeah, you may be asking. According to vozag.com, a bathroom makeover generally depends on several factors. These factors include whether additional sink, toilet and lighting fixtures are needed, the type of lighting, fixtures or finishes you need or whether there is a need to refinish cabinets.

Read the article below to read more about how much a bathroom remodel in Hialeah will cost you:

Hialeah Bathroom Remodeling Contractors & Costs

Hialeah, FL Bathroom remodeling project costs usually about $4,710 to $28,930 & depends on several requirements such as

  • Need to add sink, toilet and lighting fixtures
  • Type of lighting, fixtures or finishes
  • Need to refinish cabinets

On average, a bathroom remodel costs around $16,000, that is according to Porch.com. It is so easy to dream about how you want your bathroom to look, but the sad truth is, your budget limits your options. Indeed, redoing a bathroom can be both costly and challenging- but it shouldn’t be. I am here to tell you that a limited budget should not keep you from getting the bathroom design you desire.

If you want to save on your bathroom remodel, you may want to try some practical ways to cut remodeling costs. As this article from porch.com notes, one creative yet cheap way to freshen up an outdated bathroom is to buy new inexpensive shower curtain, decorative towels, or a picture to add an element of decor and style to your new bathroom.

Read this article to get more practical tips to save money on your next bathroom remodel.

Tips To Save Money On Your Bathroom Remodel

For those who aren’t ready to commit to spending upwards of $16,000 for a complete bathroom remodel, consider spending money on aesthetic changes to make your bathroom feel new and improved without breaking the bank. Here are some easy DIY tips to make a big impact without spending hoards of money:

Paint: A fresh coat of paint can instantly freshen up even the most outdated bathrooms.

Fixtures: Update light fixtures, sink faucets, towel racks, and drawer knobs. Look online or visit antique stores to find unique and inexpensive fixtures.

Accessories: Buy a new shower curtain, decorative towels, or a picture to add an element of decor and style to your new bathroom.

By now you have an idea about the hialeah bathroom remodel cost. Visit OrrPlumbing.com or Call Douglas Orr Plumbing at 305-887-1687, 954-522-8282 or 1-800-DOUG-ORR to schedule a service!

 Before calling an expert, you may want to check out these tips for hiring a bathroom remodeling contractor. Also, don’t forget to watch this video with useful bathroom remodeling ideas if you are on a budget.

Tips On Finding Fast Kitchen Remodeling Services In Bowie MD

fast kitchen remodeling services in Bowie MDThe stress you experience when remodeling your kitchen has been compared to that of moving house or getting a divorce.  Having incompetent contractors or service providers trudging through your home doesn’t ease the stress either!  Plus, there is the little issue of destroyed plumbing to contend with.  No wonder something as simple as remodeling your home can cause more burden than it should!  That doesn’t have to be the case though, if you do your homework before the first hammer is lifted to your walls.

There are a few things to remember when deciding on which contractor you should turn to for your remodeling needs, and it helps if they can make the process stress-free.  But not everyone knows what to look for when choosing a fast and reliable service provider.  Hopefully this checklist will give you a better idea of what to look for in a kitchen remodeling company.

  • Get Recommendations

This is probably the first thing that you should do before calling around for estimates.  There is a very good chance that you know someone who has had their kitchen remodeled, and they would be a good point of reference.  Ask your friends and family for recommendations, or turn to the internet for help.  We live in a time where everything is chronicled online, so do a bit of digging there too.

  • Do Telephonic Interviews with your Shortlisted Contractors

Once you have an idea of who to get in touch with, spend some time asking them the questions that matter to you.  Your home is your castle, so you want to make sure that you are hiring someone who will treat it as such.  Here are a few important questions to ask potential contractors before you hire a company:

–          Do they accept projects of your size?

–          Would they be willing to provide a list of previous clients as a reference?

–          How many projects do they have going on at the same time?

–          What is the turnaround time? Will a quick plumbing job turn into 3 year overhaul?

Companies who are willing and able to respond to your questions are reinforcing their reliability, service and availability.

  • Play Investigator

With the information at your disposal, you can now go ahead and investigate the facts that these contractors have given you.  Don’t be afraid to contact previous clients to ask them about the service and quality of the work done for them.  Don’t leave out the internet either. There are countless of websites that allow consumers to leave reviews for contractors and service providers.  Use them to get an inside scoop on what you’re signing up for.

  • Find a Multi-Tasker

Having a contractor capable of fitting cabinets for you is great, but what if that is all they are able to do?  Find a company that offers a range of services to their clients.  This should definitely include plumbing, especially when a Kitchen Remodeling project is involved.  Plumbing911 in Washington DC is one such service provider, who are able to provide you with a full range of kitchen remodeling services.

  • Get Estimates

Ultimately, once you have found a great contractor (or two), you are going to want to know how much it will cost.  The cheapest doesn’t necessarily mean the best, just like hiring the most expensive contractor won’t guarantee the best work.  Find a happy medium when comparing estimates, see what you are comfortable with and don’t shy away from asking questions about the pricing.

The tips above will help you find fast kitchen remodeling services in Bowie MD. If you are looking to renovate your kitchen on your own, this article will teach you how to give your kitchen a quick makeover. Keep in mind though, that when you set out to remodel your kitchen, hiring a professional kitchen remodeling company will save you time and money. Visit www.WashingtonDC.Plumbers911.com or call Plumbers 911 Washington DC now at 1-877-7-4LEAKS to schedule a service!

Check out this video for Kitchen Remodeling Ideas and Tips: Before You Call a Professional

Fort Lauderdale Furnace Maintenance Tips For The Homeowner

Fort Lauderdale furnace maintenanceComplete furnace inspections and repairs are best left alone to professionals, but as a homeowner there are several maintenance actions you can take to keep your furnace clean and in top shape. Here are some DIY furnace maintenance tips to follow:

1.       Power off.

Switch off power and fuel supply before performing any water heater maintenance.

2.       Get rid of dirt.

Dirt buildup can be a big problem if not addressed properly. It can lower the efficiency of your furnace and can cause overheating which may in turn lead to damage. Keep your furnace free of dust or dirt by regularly cleaning the blower assembly and motor, about once every month.

3.       Check for holes or cracks that may need repair

Holes or cracks in the exhaust have the potential to leak carbon monoxide into your home. The fix: patch small holes with aluminum foil duct tape.

4.       Clean or replace oil furnace filter

If you have a permanent oil filter, remove and clean filter according to manufacturer’s instructions. If your oil filter is disposable, remove, replace and discard the old oil filter.

5.       Inspect the fanbelt. Check to see if fanbelt is wearing or getting loose. Replace if fanbelt is wearing out, tighten fanbelt if belt is getting loose.

6.       Have your furnace professionally serviced annually. This will ensure that your furnace is always in top condition and help you avoid costly home heating repairs.

If used correctly, I am sure that these Fort Lauderdale furnace maintenance tips will help you maintain your home heating system so that you can keep it running smoothly and avoid costly home heating repairs later on.

You may also want to check out this article by Angie’s List if you want to know how much is furnace installation cost.  Don’t wait until your furnace stops working; have a professional service your water heating system! Call www.Florida.Plumbers911.com now at 305-662-0668 (Miami-Dade County FL), 954-468-0512 (Broward County FL), 561-327-6287 (Palm Beach County FL) to schedule a service:

Are you in need of a reliable plumbing expert? Watch this video in which a local Hollywood plumber from Broward County Florida, talks about how their 24/7 Plumbers in Hollywood Florida are Always Available, 365 Days a Year .

DIY Florida Faucet Repair: A Guide To Homeowners

Water tapA lot of things can go wrong when it comes to faucets whether it’s broken parts, incessant leaks, or a scalding hot tap. In this handy guide, we’ll give you tips to help you troubleshoot and repair a leaky faucet.

Who isn’t familiar with the annoying and incessant drip brought by the leaky faucet. Thankfully, this typical irritant has some pretty simple solutions and quick fixes.

If you’re looking to getting rid of the noise while waiting for your plumber or at the very least, the next day before you can get it fixed, try tying a string around the faucet and leading the string towards the source of the drip. Secure the string so it leads the drops of water down the string instead of annoying you by dripping on your sink.

Now, for a more permanent fix:

It’s highly likely that the source of the leak is an errant washer. Don’t you worry. These things are pretty easy to replace.

First, turn off water supply. You wouldn’t want water gushing all over your kitchen.

Next, you can begin by disassembling your faucet, starting with the handle knobs. Remove whatever ornamental parts there are using a screwdriver. Under the knob, unscrew the screw that is used to mount the handle to the stem. Remove the rest of the handle.

From there, you can use a wrench to loosen the packing nut and the stem. Remove both.

Take note if any of the parts you removed show signs of damage. If they do, take them to your local hardware store to look for a suitable replacement. If everything seems to be in order, check the O-ring and washer. If these items prove to be the culprit, double check with your handyman to make sure you’re getting the right size and type. These things need to be a perfect fit so you have to be as accurate as you possibly can.

After this point, you can begin by replacing the parts in reverse of the order by which you removed them. (Didn’t we tell you to take note?) Turn on your water supply again and check to see if you’ve remedied the problem. If, after these attempts, and your faucet is still leaking, there might be other problems with your plumbing. It’s best that you consult a professional so they can address these concerns and more.

Now you know the basics of Florida faucet repair. For professional help, check out Douglas Orr Plumbing. Call them at 305-887-1687 or 954-522-828 OR 1-800-DOUG-ORR. Check out this link on how to install two-handle faucets.

You can also watch this video on tips for your next outdoor shower:

Where To Buy & How To Use Compression Plumbing Fittings In Rockville MD

Plumb jointsCompression fittings are used to connect your pipes together. These fittings serve as substitute to soldering two pipes, especially when it comes to joining two pipes that would need regular maintenance and disjointing. The nature of the compression fittings make disassembly easier compared to two pipes soldered together.

The downside however, is that they are more susceptible to damage from changes in the environment of your pipes like movement and pressure. They are also more susceptible to leaks, especially when mishandled. When this happens, it might be time to replace your compression fittings.

Compression fittings, as with most plumbing supplies, should be readily available at your nearest hardware store and supplies shop. If not, there are a lot of online stores that provide and deliver. Make sure that you first look up exactly what kind of compression fitting you should get and if it’s appropriate to your needs and fixtures.

How to Install Compression Fittings

While these fittings are easy to install or replace, they do not create a lifetime seal and will therefore need to be replaced from time to time. Care must be used when installing a compression fitting to ensure that a proper fluid tight seal is achieved. Use these tips to learn how to install compression fittings.

As you can see, compression fittings will help make managing and repairing your plumbing system easier. They give allow for more flexibility in terms of repair and regular maintenance of your pipes, a feat that wouldn’t be easy if major waterways that you need to clean out were soldered together.

Due to the nature of the fittings, it is expected that you will have to make adjustments to them or replace them altogether eventually. Thankfully, replacing a compression fitting is relatively easy. If you’re lucky, you might not even have to replace it at all but simply tighten or loosen, based on the problem you need to solve.

If you’re purchasing a new appliance or installing a new fixture, you will need to replace the compression fitting. It’s really easier than it sounds. All you need to do is be guided on the dos and don’ts. Here’s a quick rundown of how to replace them:

How to Replace Compression Fittings

When you replace the appliance or fixture, you need to replace the compression fitting. You don’t need to replace the entire fitting, only the ferrule inside to make a new compressed seal. You could possibly reuse the old one, but this creates a risk of an improper seal and an eventual leak.

Hopefully, these guidelines help you with compression plumbing fittings in Rockville MD. Now that you know about compression fittings, here’s a quick rundown of plumbing tools every homeowner should have. For professional plumbing help check out Plumbers 911 Washington DC. You can reach them at 1-877-7-4LEAKS.

Before you reach for that phone, here’s a quick video on what to expect from Plumbers 911:

A 101 On Septic Maintenance Cost In Washington DC

septic maintenance cost in Washington DCYour septic system plays an important role in your home. It is responsible for the proper storage and disposal of waste materials that you produce whenever you use your plumbing fixtures. The septic tank, meanwhile, is the large container that’s buried underground and is usually made from concrete, plastic or fiberglass material. It is responsible for storing and filtering the waste materials in your home. In other words, it is the last stop of sewage that passes through your drain pipes or the waste collector. Now the thing is, the septic tank can only hold so much. It is prone to overflowing when not maintained properly.

You might ask how the tank is maintained and my answer is, through several ways. First of all, you must not flush down non-biodegradable materials down the toilet or other drains in your home for that matter. Examples of these include condoms, cigarette butts, diapers, sanitary napkins and other objects that won’t disintegrate or decompose. They will just cause problems in your tank. Another thing that you have to ensure is the regular pumping out of the tank. This is needed to prevent overflows.

Septic tank pumping involves the siphoning of waste materials from the septic tank. This will lessen the content of the tank and also allow water to drain from it without any trouble. Pumping is absolutely essential and something that you should not disregard as a homeowner. You also have to remember that you cannot do this on your own and that is why you’ll need to hire professionals. However, most people are concerned about its cost.

Septic tank pumping cost varies across states but the reported general expense according to Home Advisor is between $469 to $647. There are of course extremes beyond this range. For instance, there were homeowners who reported spending just about $200 for the pump-out. There were also those who reported spending as high as $855.

To get an accurate quotation on septic maintenance cost in Washington DC, consult a plumbing professional. You might also want to read this article that features tips on how to take care of your septic tank to keep your septic system at tip-top shape. If you need an expert plumber now, just visit  www.WashingtonDC.Plumbers911.com or call 1-877-7-4LEAKS to schedule a service!

Learn how to care for your on-site septic system! Watch this video now.

Beautiful Bathtub Tile Ideas In Palm Beach County

bathtub tile ideas in Palm Beach CountyAccording to research, a beautiful bathroom is among the few places at home where one spends his much-needed me-time. You can simply make your bath; light some aromatic candles and bask in your tub’s soothing power while reading a good book. The only thing that you have to check on though is the condition of your bathroom. Is it even a pleasing place to stay in? Is your bathtub still pretty? If you’re unfortunately in the process of renovating the room, might as well heed my advice and consider my suggestions for bathtub tiles. Here are some of the impressive concepts I found online:

Shower Tile That Wakes You Up

This pictured tile is one of my favorites. I love the cool, almost retro contrast between the Matte Glacier vertical strip with the Satinglo French Roast field tile. Yes, it’s a tile that will wake you up every morning just by looking at it. This is an entirely do-able DIY project; no complicated designing at all. Note that the Matte Glacier strip is close to 4 feet wide, possible only in a shower of the size shown here. You’ll need to scale down the width of that strip for normal showers.

It’s a pretty stunning collection of bathtub and bathroom tile ideas, isn’t it? Just remember that you should pick out the tile that suits the theme of the room — or your house for that matter. Also make a decision based on the right material that you can install and maintain. Tiles do need to be maintained appropriately for them to retain their luster and beauty. Now if you’re planning on installing them yourself, use this easy DIY guide. Prepare your tools and materials before starting the project.

How to Tile Around a Tub

Tile is the most popular choice for walls in new and remodeled baths because it’s impervious to water, extremely stain-resistant, easy to clean, and available in dozens of colors, sizes and styles. With the right tools and materials —and the patience to lay out the tiles properly—tiling a bath or shower surround is a job that most homeowners can pull off.

For the project shown here, we enlisted the help of tile contractor Joe Ferrante, who has been laying tile forThis Old House projects since 1986. The first and most important step, insists Ferrante, is to start with a clean, stable substrate. He then fills the backer board seams with thinset mortar and embeds fiberglass-mesh joint tape int he mortar. Finally, to ensure a strong, long-lasting bond for the new tiles, Ferrante goes one step further and trowels thinset mortar over the entire wall.

I hope that you loved these bathtub tile ideas in Palm Beach County. If you need installation instructions for your tub, read this DIY guide on how to install a bathtub properly. And should you require professional plumbing assistance, just visit www.OrrPlumbing.com or call them to schedule a service appointment!

Learn how to properly clean a bathtub to keep it in good condition! Watch this video from Howcast.

Quick And Easy Porcelain Sink Repair In Washington DC

 porcelain sink repair in Washington DCA porcelain sink is known for its mesmerizing appeal. It is glossy, smooth and also relatively durable. However, it is not invincible. Just like ceramic sinks, it may also chip off and incur cracks, too. So if ever you’re faced with an almost ugly sink, stop complaining and get your repair kit ready. You can and you will make it look lovely again. Just follow these steps:

1. When choosing a repair kit, pick one that matches your sink’s color. If you cannot find an exact, ready-to-use match, you may also combine the alkyd paint with the repair compound. Test if it already matches and then wipe it off ASAP with a lint-free cloth.

2. Using a medium-grit sandpaper, scrub the affected area to lighten the crack or remove any rust. Do this until the area is smooth. Once done, wipe rust and sediments off.

3. Dampen a soft cloth and clean the area. Let it dry before doing proceeding with the next step.

4. Protect your hands from the chemical compound by wearing a pair of rubber gloves. Mix the repair compound as instructed in the manual.

5. Apply the mixture on the hole or crack using a razor blade. Make sure that it’s level with the surface. Smoothen the area with the razor blade and allow it to dry.

6. Get a cotton swab and dip it in nail polish remover. Rub it on the edges of the patch that you’ve made to remove any excess mixture. Be careful when doing this so that you won’t mess with the patch.

7. Let the surface dry and voila! Your porcelain sink is pretty again!

Meticulously follow these steps on porcelain sink repair in Washington DC and you’ll surely give your sink a remarkable makeover. Remember that proper maintenance will keep it in great condition so you might want to read on how to clean a porcelain sink. And should you need professional plumbing assistance, call Plumbers 911 Washington DC at 1-877-7-4LEAKS!

Do you need gas system installation and repair services for your home? Watch this video now and find out why Plumbers 911 Washington DC is the best team for the job!

How Easy It Is To Perform A Running Toilet Fix In Opa-Locka FL

running toilet fix in Opa-Locka FLA running toilet may not be that grave as compared to other plumbing issues but it does provide its own share of inconveniences. For instance, it wastes a lot of water thereby contributing to your monthly utility bill. And while it may not triple or quadruple your expenses, I still bet that you won’t put up with shelling money out for something unnecessary. So before I teach you how to fix this kind of problem, let us first talk about its main causes. Here’s an article you should read.

Figuring Out Why the Toilet Keeps Running

Take a few minutes to figure out why you have a run-on toilet, and then you can repair it. You have a run-on toilet if each flush doesn’t end with a gurgle but instead continues with a hissing sound, with water running into the toilet bowl.

To find the source of the trouble, remove the toilet tank top and place it in a safe location. Then push the flush lever and watch what happens. Don’t worry about the water in the toilet tank — it’s clean. Run-on toilets are usually caused by a problem with the tankball, the ballcock or intake valve, or the floatball.

Apparently, there are several factors that may result to a running toilet. It could be a sticky flush valve,  a malfunctioning flapper valve, problems with the floatball or ballcock issues. And you know what, each of these require a different way of getting fixed up. So the principle is to first find the real cause of the problem and then provide the right solution afterwards. Anyway, here’s a DIY guide that can assist you in doing the repair on your own!

How to Fix a Running Toilet

Your toilet flushes just fine, but it doesn’t know when to quit. Perhaps it stops running and then starts up again suddenly or constantly leaks into the bowl. Either way, it’s wasting a lot of water and making that noise that keeps you up at night. Fortunately, it’s usually not difficult or expensive to repair a toilet if you know a bit about how they work. Be systematic about tracking down the problem. There are only so many things that can go wrong inside a toilet tank.

I hope you loved these short yet informative resources about running toilet fix in Opa-Locka FL. You also have to read about proper toilet maintenance and care to prevent plumbing problems. And should you need professionals to help you out, just call Plumbers 911 Florida at 305-662-0668 (Miami-Dade County FL), 954-468-0512 (Broward County FL), 561-327-6287 (Palm Beach County FL)!

Learn all about Plumbers 911 Florida’s amazing services! Watch this video.

Choosing Kitchen Tiles Ideas In Golden Beach FL

kitchen tiles ideas in Golden Beach FLNothing can make cooking even more exciting than a beautiful and functional kitchen. While a complete set of cooking utensils and well-thought work areas add functionality to the said room, there are also a number of factors that can contribute on its beauty and aesthetic appeal. These include but are not limited to the room’s paint color, theme and yes, even your tiles. So if you are looking forward to upgrading the look of your kitchen, start by choosing the best design and type of tile. Here’s an article that features some designs you might want to consider.

Style Your Kitchen with the Latest in Tile

“Glass accent tile is really exciting right now,” says Bill Wolf, owner of DreamMaker Bath & Kitchen in Grand Rapids, Mich. Used for kitchen backsplashes, shower walls and as accents on floors, glass tiles add a depth, sparkle and luminescence not found in ceramic or natural stone.

With a broad color palette, and finishes ranging from glossy to flat, glass tiles can fit most design schemes. When used sparingly, vivid glass tiles can provide exciting visual highlights. Conversely, when covering an entire bathroom wall, glass tile can create a luxurious spa-like atmosphere. Bonus: Many glass tiles are made from recycled glass.

Apparently, there are various types of tile accents that you can use on your kitchen. They can range from glass to metal to hardwood, from ceramic to marble to granite to mosaic. Just make sure that you’ll choose a design that will work best with your theme. To help you make the right choice, here’s a buying guide you can follow!

Tile Buying Guide

Tiles offer a hardwearing, long lasting finish to bathrooms and kitchens. B&Q offers a wide range of tiles for every style and budget, from traditional to contemporary to help you get the look you want. We also offer “how to” advice should you need help in fitting them. This guide will help outline the different tiling styles and materials, as well as advising you on adhesives and grout you’ll need to do the job.

Ceramic tiles are the lowest maintenance of all tiles; they don’t need sealing and are waterproof after grouting. They’re easy to cut and fix too – and thanks to inkjet printing advances, can mimic other materials like natural stone.

I hope that you learned a lot tips with regard to choosing kitchen tiles ideas in Golden Beach FL. Also read articles about how to install kitchen tiles if you would like to take on this project on your own. And should you need help with kitchen remodeling, don’t forget to call Douglas Orr Plumbing at 305-887-1687 or 954-522-8282!

Learn how to fix leaking pipes. Watch this video now and learn some DIY tips from your Miami plumber.

Easy Clogged Drainage Solutions For The Homeowner

The garbage disposal is among the numerous appliances that we use every day. I can even personally say that I can’t live without it for the reason that it lessens the food waste we produce at home. Instead of simply throwing anything in the trash, I either use some as compost materials while I grind some in the disposer. Now the fact of the matter is that just like any other appliance we have, the machine will eventually malfunction. And with that being said, I want to share helpful repair guides so that you’ll know how to handle related emergencies in the future.

Garbage Disposal Will Not Turn On

OK, before we start with any troubleshooting, I want you to promise me that you will please obey the cardinal rule of “Garbage Disposal Repair”. That is you will never put your hand in the hopper (down the drain into the disposal)!

That being said, let’s take a look at fixing this vital piece of kitchen equipment. If the disposal will not turn on and it is NOT making a humming sound, then there is an electrical problem.

The article above gave some tips on how to troubleshoot and fix a garbage disposal system that won’t turn on. Apparently, in such cases where in the machine won’t work, you can simply press the reset button to put the unit in factory state. But remember, before you do any kind of inspection or repair, you have to make sure that the circuit breaker is off. You have to be very careful so that you won’t get electrocuted. Now if the problem is that the machine won’t drain properly, follow this article instead.

Troubleshooting a Garbage Disposal that Won’t Drain Properly

Sometimes your kitchen garbage disposal won’t drain well. Though it is very enticing to hire a plumber to deal with the trouble, repairing a garbage disposal that won’t drain properly is a straight forward job. Troubleshooting a garbage disposal is slightly daunting and dangerous if you do not undertake necessary precautions. However, with a little know-how, repairing a garbage disposal that won’t drain is easy.

Ensure to make safety your first concern. Then, when troubleshooting an in-sink food dumping unit or a garbage disposal, safety concern is a must. Never put your bare hands inside the unit. Turn off all switches and breakers before fixing your garbage disposal. However, if you’re not 100 percent certain with what you need to do, call a plumber.

I hope that you learned a lot with regard to how to fix garbage disposal in Miami Gardens FL. Also read about proper garbage disposal  maintenance  to prevent issues with your unit. Should you need professional plumbing help, just call Douglas Orr Plumbing at 305-887-1687 or 954-522-8282!

Repair leaking pipes at home fast! Watch this video now to learn how.

Buying And Using A Complete Toilet Repair Kit In Weston FL

complete toilet repair kit in Weston FL

Image courtesy of foto76 at FreeDigitalPhotos.net

It is not unusual for homeowners to experience toilet problems. Aside from clogging, you surely have endured the inconvenience of running toilets; weird flush sounds and malfunctioning flush mechanisms. If you haven’t, lucky you! Going back to my topic for today, you actually don’t have to worry about toilet issues. These fixtures are pretty durable and easy to fix. You just need the right tools and supplies to successfully put it back to good working condition. To make the job easier, you should also consider using a complete toilet repair kit. Here’s an article I found online that features a specific kit brand with a complete DIY guide. Check it out!

Toilet Repair Kit Installation Guide

Some of these toilet issues include the following: 1. water leaking from the tank into the bowl due to a faulty flapper valve,2. a water leak from the rubber gasket between the tank & bowl, 3. water leaking out of the bottom of the tank due to corroded tank bolts, 4. the fill valve refills the tank every few minutes, 5. the toilet lever won’t flush properly, 6. a constantly running toilet, 7. a water leak from a worn out flush valve gasket, 8. or a water leak from the tank’s supply line gasket.

This toilet also had a slow leak from the toilet water supply valve, so I bought a new one for about $5. The tools needed to install this Fluidmaster kit include a pipe wrench, pliers, scissors, a bucket, a sponge, and a hand saw.

Amazing kit, isn’t it? It is cheap and comes with an instruction manual for you to fix your toilet fast. Now if you’re the traditional DIY plumber who prefers the good old way of handling toilet issues, there are other resources on my blog you can follow. Now before you do anything on your ceramic throne, you have to identify the real cause of the problem. Here’s a guide that can help you out in terms of troubleshooting.

Troubleshooting Common Toilet Problems

The toilet tank is where all the major plumbing takes place in a toilet. The purpose of the tank is to contain the water needed to flush the toilet and to conceal the plumbing apparatus that fills and empties the tank. Open any two toilet tanks and you’ll often find very different components inside. Why? Well new technologies and materials have evolved over the past several decades, but in the end, there are just two major components with several variations. 

I hope that you enjoyed learning about the proper way to use a complete toilet repair kit in Weston FL. To successfully complete your repair project, also learn about the parts of a toilet. And for professional plumbing services, don’t hesitate to visit Plumbers 911 Florida’s website or call them at 305-662-0668 (Miami-Dade County FL), 954-468-0512 (Broward County FL), 561-327-6287 (Palm Beach County FL)!

Are you having problems with a running toilet at home? Watch this video to learn how to fix it!

Hot Water Leaking In Medley FL: What Kind Of Repairs Can You Actually Do?

hot water leaking in Medley FLFinding hot water leaking in your basement is a sign that should not be ignored. It could be, of course, signaling that there’s a problem with your hot water heater. Fortunately, leaks are not that difficult to fix. I must let you know, however,  that there’s only so much that you can do when it comes to repairing a broken water heater. Since it’s an appliance that’s operated by electricity or gas, you’ve got to have adequate electrical skills to be able to tinker with the equipment. So if you do, then good for you. If you’re just a DIY plumber like me, then you’ll have to be contented with basic troubleshooting and repair. If the problem already involves repairing the very machine already, then you should leave it to the professionals. Anyway, just to give you some tips on how to handle water heater leaks, here’s an informative article that can be your guide!

Water Heater Leaking: What You Need to Do Now!

A hot water heater leaking on the floor is generally a millstone around the neck especially if you know nothing about troubleshooting the problem. You’ll be in a real pickle when you find one dripping your floor wet. Well, are you going to call a professional or are you up for some DIY troubleshooting?

You may not have given it much thought, but the water coming into your home passes through a system of pipes, and most often than not, it is cold or cool depending on the climate you have. To make it warm for a hot shower or bath or for your dishwasher use, you will need a device to heat it up. So enters the water heater. But what should you be concerned about if a pool of water suddenly appears on the floor at the bottom of the tank?

Okay. So the article pointed out some important steps that should be done first at the sight of a water heater leak. First of all, you’ll have to turn it off and then proceed to shutting down your water supply. You have to do these things to prevent accidents such as electrocution. Anyway, once you’re sure that both are off, you may go on and check the main source of the leak. The write-up also provided explanations that can tell you whatever caused the problem. Now if ever you find the leak at the base of your appliance, check out this video that I found. It will help you perform basic repair to end the problem.

How to Fix a Tank Type Water Heater: Water Leak Around Base of Heater

Before we get started some safety tips are Make sure you cut the main power supply to your house, you can find this in your breaker box. Make sure you turn off the main breaker and not individual breakers as there is still a power source to your home. Next, make sure your pilot nob is in the pilot position and that your water supply is turned off.

There are a number of causes for a leaky water heater. If the problem is simply a pool of water beside the heater, first check to see if it is caused by condensation building up on the sides of your water heater. In humid areas this is often caused by cold water entering the tank. In order to see if this is the problem turn off the power or gas to the tank for a few hours if there is no longer pooling water or water on the sides of the tank, then this was the problem. Congratulations, there is no leak to worry about.

I hope that because of the resources I shared, you’ll know how to handle hot water leaking in Medley FL. Also check out other articles I’ve written that can provide you water heater maintenance tips, tankless hot water heater installation manual and even some guidelines on hiring the right plumbing service company. Should you need professional plumbing help right now, just call Douglas Orr Plumbing at  305-887-1687 or 954-522-8282!

Flushing your water heater tank is part of its regular maintenance! Watch this video to learn what to do when it doesn’t drain at all!

How To Find A Miami FL Plumbing Supply Online

miami fl plumbing supply onlineAt this day and age, it has become so easy to shop for our needs without even driving to the store personally. The popularity and success of the e-commerce industry provided us a better, faster and more convenient way to do our shopping anytime, anywhere as long as we have a gadget with internet connectivity. In fact, clothes aren’t the only things that you can buy online! You can make purchases for home furniture and appliances, gadgets, medicines, fresh produce, groceries and even plumbing parts! Yes, you got that right! You can purchase plumbing supplies with just a click of a mouse! And from a recent article I read online, I quote,

“The Internet has revolutionized our way of life in many ways including the way we shop. If you need plumbing supplies and are not willing to go to a physical store, you can still shop online from stores like Aaron & Company, Pacific Plumbing, Crane Plumbing and Hughes Supply and still get the same results. There are things that you have to consider though because this way of shopping is still in its infancy and things can always go wrong to your own detriment. Here are the things that you need to keep in mind when shopping online for plumbing supplies.” (See full article here.)

If you read the entire article, it didn’t only emphasize the importance and convenience that online plumbing supplies provide. It also showed a lot of ways to find the best e-commerce sites for your plumbing needs. For instance, you can always take advantage of Google’s search engine. You may also read reviews from sites such as Yelp. Aside from that, the write-up provided a list of reputable shops where you can order parts, tools and equipment. Isn’t it very helpful? Now if you are intending to make a purchase soon, let this video give you additional tips, too!

How to Buy Plumbing Supplies

Plumbers are expensive. Learning how to do a few simple home plumbing repairs can save you a ton of money. In this video, master plumber Tim Flynn shares tips on buying plumbing supplies.

I hope that my blog post for today helps you find a miami fl plumbing supply online. These sites are awesome platforms to purchase copper or PEX pipes, plumbing fittings and even tools like drain rods! And should you need professional assistance for your plumbing needs in Miami FL, simply call the experts from Douglas Orr Plumbing at 305-887-1687 or 954-522-8282!

Are you planning on buying boilers too? Watch this video to get helpful tips!

The Blanchard Plumber’s Manual On Water Heater Thermostat Troubleshooting

Blanchard plumber’s manual on water heater thermostat troubleshootingA water heater is a home appliance that’s worth your every penny. Imagine life without ample supply o hot water. What would you do when it’s winter and the temperature is so low for you to take a decent bath? What if you need hot water to clean your plates, utensils and what-nots? Remember that your water heating system isn’t a cheap investment and that’s why you’ll need to take care of it properly to prolong its life. Now one of the most common parts of a heater that usually gets neglected is the thermostat. What is it anyway and why is it important for the system? I want to quote this quick definition from a website I always enjoy reading:

“An electric water heater thermostat tells the heating elements when to heat up. Most electric hot water tanks have two elements and two thermostats. The elements do not heat up at the same time. The top element heats the water first and then the bottom element kicks in.

The upper thermostat acts as a coordinator between the two elements. When the water in the top part to the tank is hot enough, it lets the lower thermostat go into action. When the lower thermostat senses the water is too cool it turns on the lower element. This happens only after the upper element has finished heating.” (See full article here.)

According to the article I just shared, the thermostat is responsible for controlling the elements in a hot water heater. It simply queues which among the top or the bottom element should heat up. In most cases, the top one goes first, followed by the bottom one. And I think you know what will happen when this water heater part malfunctions — you won’t have hot water for the day. So when that happens, just take a look at this quick and easy guide on thermostat repair!

How to Fix the Thermostat on a Hot Water Heater

An electric water heater has one or two thermostats, depending on the gallon size of the tank. The thermostats regulate the temperature of the water by turning off and on the heating elements. When the water cools below the temperature setting on the thermostat, it turns on the elements. It turns elements off when the water reaches a predetermined temperature. When one or both of the thermostats fail, the water heater will quit producing hot water or could heat the water to dangerous temperatures. Fix the thermostats by replacing them with new ones.

I hope that you enjoyed reading the Blanchard plumber’s manual on water heater thermostat troubleshooting! If you want to learn more tips and tricks for your water heating system, simply browser my blog site and read about tankless hot water heater or get updates on water heater prices. And if you need plumbing experts to install or repair your heater for you, simply hire local Blanchard plumbing professionals in CA! Reach Plumbers 911 California at 800-731-1139!

Prolong your water heater’s life with the right care and maintenance! Watch Plumbers 911’s video to get awesome tips!

How To Have A Profitable Plumbing Employment In Sweetwater FL

plumbing employment in Sweetwater FLThe road to being a licensed plumber is laden with several challenges and requires a great deal of hard work, patience and determination. If you are really motivated to tread on a plumbing career, you should be ready to take on laborious years of studying, practicing and training. And hey, do I have to emphasize that you will also take the pass or fail licensing exam? Yep. You’ll have to get through all that. I just wish that you didn’t turn cold feet because of my post. Ha! Seriously, it may be challenging to become a tradesman in the field of plumbing but of course, it is doable. Here’s an article to provide you a list of what you should do to become one!

How To Become A Plumber | A Step By Step Guide To A Plumbing Career

If you’re interested in how to become a plumber, you’re not alone.  The plumbing trades are extremely popular these days, even in a slow moving economy such as ours.  The key is preparing yourself as early in the process as possible so that you are able to get a good plumbing apprenticeship.

Let’s take a look at the steps you will need to take in order to become eligible for plumbing apprenticeships in your state.  Keep in mind, every state may have different requirements, but the majority will follow these general rules…

According to the write-up you have to be a high school graduate (with good grades); take vocational plumbing course; complete an apprenticeship program and then take the licensing examination. That’s a load of work for a four-step journey, huh? And take note, you have to do good if not great at it! The industry is now teeming with so many competitive plumbing experts and if you won’t try to be as good at the trade, you might end up getting no clients at all. Anyway, one part of the journey that you might be wondering about right now is the so-called apprenticeship. To answer whatever questions you may have, here’s an informative resource for you!

How to Get a Plumbing Apprenticeship

Individuals who want a career in plumbing will get the required education and experience by becoming a plumbing apprentice. An apprentice learns the plumbing trade by working with a licensed plumber or registered organization such as a union or a school. An apprenticeship involves classroom learning and on the job experience. Get a plumbing apprenticeship by joining a union or a trade school, or by working directly with a master plumber while taking classes.

I hope that the resources I shared today will help you achieve a fruitful career and profitable plumbing employment in Sweetwater FL. You can also browse my other posts to learn more plumbing information such as proper hot water heater installation, what specific toilet flush sounds mean or even tried and tested septic tank care methods. In case you need professional plumbing services for your residential or commercial properties, just call Plumbers 911 Florida at

Learn all about the most common plumbing problems you should be aware of! Watch Plumbers 911’s video now!

The Manteca Plumber’s Handbook On Tankless Hot Water Heater Systems

Manteca plumber’s handbook on tankless hot water heaterHot water heaters are indispensable appliances that have long been part of American homes. In fact, according to research, about 90 percent of households have water heating systems. The only question is, what type of heater do you have? There’s a wide array of water heater varieties out there, categorized according to their design, power source and whether they’re tank-type or tankless. If you have a tankless hot water heater, then this is your day because I’ll be sharing some valuable pieces of information with you. Learn how this kind of heating system works by reading this article I found online.

Tankless Water Heaters – What You Need to Know

So you’re tired of running out of hot water in the shower and want to replace that old hot water heater. Or maybe you’re considering tankless for a new project. Well, tankless hot water heaters can be a great solution to your residential hot water needs. They’re also referred to as on demand hot water heaters because they don’t usually store hot water, but rather create it on demand.

But for all the hype surrounding these appliances there are some limitations and trade-offs to consider before you can really decide if the tankless hot water heater is for you. I have one in my house and properly used these appliances are absolutely great. Improperly used they are disappointing and expensive. They come in point-of-use and whole-house versions and there are electric tankless water heaters and natural gas or propane models. Some tankless units are sized to heat a cup of tea, others to provide enough hot water for 2 or more bathrooms. Also, the region of the country you live in has a lot to do with how much hot water a tankless water heater can produce.

The online resource I just shared gave complete information about tankless water heaters. It pointed out that this type of heating system produces less heat loss because it doesn’t store hot water in a tank and instead produces it on demand. The write-up also emphasized the three factors that you should consider when choosing a tankless heater for your home. However, what you need to ask yourself is if this kind of appliance is even worth the investment. And I quote,

Heating water accounts for up to 30 percent of the average home’s energy budget. Some makers of gas-fired tankless water heaters claim their products can cut your energy costs up to half over regular storage heaters. So is it time to switch?

Probably not. Gas tankless water heaters, which use high-powered burners to quickly heat water as it runs through a heat exchanger, were 22 percent more energy efficient on average than the gas-fired storage-tank models in our tests. That translates into a savings of around $70 to $80 per year, based on 2008 national energy costs. But because they cost much more than storage water heaters, it can take up to 22 years to break even—longer than the 20-year life of many models. Moreover, our online poll of 1,200 readers revealed wide variations in installation costs, energy savings, and satisfaction. (See full article here.)

I hope that you enjoyed reading the Manteca plumber’s handbook on tankless hot water heater systems! And should you need water heater service at home, just hire the most reliable Manteca plumbing experts in San Joaquin County CA! Plumbers 911 California delivers excellent yet affordable Manteca plumbing services! Call them at 800-731-1139!

Want to see how exactly does a tankless hot water heater work? Watch this video now!

Reliable Broward County Plumber Explains Toilet Flush Sound Meanings

broward county plumber explains toilet flush sound meaningsDo you know that in DIY plumbing, sounds are as important as appearances? When you’re in the middle of a plumbing situation, you don’t only look around for possible causes. You also listen to it. Checking your pipes is as important as listening to its sounds — if they are actually making one. And the same goes with your toilet. If it sounds weird whenever you flush it or even if it makes some sort of gurgle when no one’s using it, then you already have a lead on what to check next. And that’s what I want to share with you today. For instance,

“If your toilet makes anything other than the familiar whooshing and gurgling sounds that accompany normal flushing, it’s calling for attention. Compared to other appliances, toilets are relatively easy to please because the sounds are reliable diagnostic clues and parts are usually inexpensive. If you hear a foghorn sound, you probably have an older toilet with a metal ballcock-style fill valve, and the sound is coming from a loose washer in the ballcock assembly. If the ballcock isn’t sealed, you can replace the washer, but replacing the valve isn’t much more difficult or expensive, and it’s a longer-term fix.” (See full article.)

If you read the article above, it featured some valuable tips on how to fix a toilet based on certain sounds. If you find it a little inadequate, there are other resources online that you can refer to. So to make research easier for you, let me share this article from the best plumbing company in the US.

What Does That Weird Toilet Flush Sound Mean?

Once in a while, we find ourselves caught in a toilet situation. We deal with clogged toilet bowls, malfunctioning valves, leaking pipes and sometimes, a weird toilet flush sound. While most of us are skilled, do-it-yourself individuals, some seek the help of plumbing professionals right away to get the job done and the problem solved ASAP. However, it is also advantageous to have some basic plumbing skills to save on maintenance or repair expenses. That being said, here are some troubleshooting tips when identifying toilet problems based on flush sounds:

I hope that you liked these resources that illustrate how a broward county plumber explains toilet flush sound meanings. Should you need help with home plumbing, just call the most reliable Broward County plumbing professionals in FL! Plumbers 911 Florida delivers top-notch Broward County plumbing services including toilet repairs and many more! Call them at 305-662-0668 (Miami-Dade), 954-468-0512 (Broward) or 561-327-6287 (Palm Beach)!

Learn how a toilet works! Watch this video now!

How To Fix a Leaky Kitchen Faucet In West Palm Beach County Florida

how to fix a leaky kitchen faucet in West Palm Beach County FloridaThere will come a time when you’ll find your kitchen faucet leaking. Don’t panic. It’s normal. Just like any other plumbing fixture, your kitchen tap is also made up of parts that eventually wear out. The good news is that repairing or replacing a faucet isn’t that difficult — that is if you have basic plumbing skills and the capability to follow instructions correctly. The first question that you have to answer though is, what kind of faucet are you having problems with? Anyway, worry not because I’m here to help. Let me share with you some guidelines on fixing two types of faucet: the single-handled and the double-handled. Let’s begin with the first one.

How To Repair a Faucet

Faucets are a key part of your home for an obvious reason: They dispense water. Therefore, keeping your faucets in working condition is of great importance. A number of things can go wrong with your faucets, from leaks to noise. Sometimes you’ll need to replace a faucet altogether to solve the problem.

A dripping faucet is the most common plumbing problem as well as one of the easiest to repair. Yet many people ignore it and leave the dripping faucet unrepaired. That costs money. A steady drip can waste $20 or more in water in a short time. Multiply that figure by the number of faucet drips in your home, and you can calculate how much of your money is literally going down the drain. The waste from a dripping hot water faucet is even more because you’re also paying to heat the water before it goes down the drain.

As you have read, it is pretty simple to fix a single-handled faucet. But what if you have the double-handled type? Follow these instructions then! And make sure that you understand every detail!

How to Repair a Dripping Two-Handled Stem Faucet

Droplets from a two-handled laundry-room faucet have been falling with the relentless beat of a metronome in the home of Richard Trethewey, This Old House’s plumbing and heating consultant. “Most people will ignore a dripping faucet out of fear or ignorance,” says Richard. If they deal with it at all, it’s usually by cranking the handle so hard they risk tearing a rubber washer or cracking something and making the leak worse. At his own Second Empire house, it’s more the case of the cobbler’s child whose feet go unshod. 

When Richard does finally find a free morning to break out the wrenches, he stems the tide within 15 minutes. A homeowner with a little wherewithal should be able to finish similarly simple repairs in half an hour. “Fixing a faucet drip won’t solve the world’s water woes,” says Richard. “But it will save the finish on your enamel sink and end your Chinese water torture.”

I hope that you found these resources helpful in learning how to fix a leaky kitchen faucet in West Palm Beach County Florida. And should you need professional plumbing assistance, just call the most reputed West Palm Beach plumber in Florida! Douglas Orr Plumbing delivers excellent West Palm Beach plumbing services such as bathroom fixture remodeling and many more! Reach them at 305-887-1687 or 954-522-8282!

Want a demo on fixing a leaky kitchen faucet? Watch this video!

Copper or PEX for your Lodi, San Joaquin County New Home?

Why do you think thieves go in and steel copper piping from old abandoned houses?

copperBecause it’s copper and they get the best price for recycle copper, about $3.75 a pound.

Homeowner’s aren’t dumb either. They know that the best material for their pipe system is copper. But copper isn’t cheap. Still if you are installing a new plumbing system in Lodi, San Joaquin County, California, and you don’t ever want to worry about repiping your home, then consider using copper piping. Ask any Lodi, San Joaquin licensed plumbing professional about the best piping material, and almost all of them will say, “copper is your best bet.”  Read the following information on copper piping for a home to see exactly what I am talking about.

 

Why Choose Copper Plumbing

When it Comes to Quality, Copper is the Answer

There are so many reasons why copper’s the best choice for your plumbing system. But it’s also the best choice for other things, like flashing and wiring. In this section, discover all the benefits of this versatile material.

 

What if You Can’t Afford Copper?

Truth is, copper runs at about $3.00 per foot, and that can be tough to handle when you have to pipe a whole house. But you may not have to. There is a new piping material known for its durability and compatibility. It’s called PEX and runs anwhee from about .50 cents to $1.00 per foot, which is substantially less than copper.

What’s the best plumbing pipe for your home?

Pipes aren’t just copper anymore. Before you make a change or repair in your home’splumbing system make sure you compare costs, durability and compatibility of all available materials, so you can make the best decision for your home and your wallet.

Bottom Line

Whether you base your choice on price alone or not, if you decide to use PEX pipe on your next repiping project or on your new pipe instalation, you are still getting a very good piping material, one that is almost comparable to Copper. Still, when repiping for your Lodi, San Joaquin County home, you want to first consult with a licensed Lodi plumber, just to make sure you’ve bought the right piping materials.